|
Still deciding? Get samples of $ !
Order Sample
|
| Customization: | Available |
|---|---|
| Type: | Cutter Suction Dredger |
| Power Type: | Diesel |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. The cutter suction dredger uses a rotating auger to loosen the soil on the riverbed or seabed, mix it with cement to form mud, which is sucked into the pump body through the mud suction pipe and sent to the mud discharge area through the mud discharge pipe. 3. It is suitable for dredging in inland lakes and coastal ports with small waves and low flow rate. It is more suitable for dredging sand, sandy loam, silt and other soils. Clay can be dug after using a toothed auger, but the work efficiency is low. |
2. During the construction of the cutter suction dredger, dredging, mud transportation and mud unloading are all integrated and completed by itself, with high production efficiency. 4. Configuration of diesel engine ( Otherwise can provide carter Weichai and others diesel engine brand )Shijiazhuang slurry pump and hydraulic pump from the America or Germany . all configurations can reach the low failure low fuel consumption high capacity and high efficiency. |
| Simple to introduce the principle | |
| 1. Hydraulic cutter head rate to add the solid concentration. 2. Mixture through the suction pipe into the discharge pipe by the pressure pump to arrived the destination .( power is from hydraulic electric or both together) |
| 1 | Cutter arm and cutter head | Dredger reamers are key tools in dredging projects, which can efficiently cut and stir the seabed mud, increase water depth and improve navigation safety. |
| 2 | Spud | The first is the main pile. When pumping sand, the hull and bucket wheel frame can swing around this main pile; the second is to cooperate with the transverse winch, and use the left and right positioning piles to insert and pull out in turn, so that the bucket wheel frame and the hull move forward step by step, so that the working surface can obtain the specified longitudinal length and depth. |
| 3 | Discharge pipe | The mud discharge pipe refers to the pipe for dredging machinery such as (cutter suction) dredging boats to transport mud. It is mostly made of plastic or steel pipes, and perforated mud discharge pipes are common. |
| 4 | Control platform | The centralized control room of the cutter suction dredger is responsible for monitoring, controlling and adjusting the operation of various mechanical, electrical, automation and other systems on the ship to ensure the normal navigation and safety of the ship. |
| 5 | Anchor boom | The function is to move the lateral anchor forward to meet the requirements of the cutter lateral excavation. The advantages of anchor rod system for moving anchors are convenient and economical use, fast anchor moving speed, and not affected by adverse factors such as tides or shallow waters near excavation trenches. |
| Water flow 3000m3/h basic parameter | |
| Solid sand Capacity | 500-700 m3 |
| Discharge distance | 1500-2000m |
| Diesel engine power | 895kw |
| Auxiliary engine | 298kw |
| Discharge pipe diameter | 450mm |
| Cutter shaft power | 170kw |
| Dredging depth | 15m |
| Fuel tank capacity | 65000L |
| Total power | 1233KW |
| 1. | Deck plate thickness 10mm |
| 2. | Bottom plate thickness 12mm |
| 3. | Side plate thickness 10mm |
| 4. | Front plate thickness 18mm |
| 5. | Back plate thickness 18mm |
| 1. | Deck plate thickness 8mm |
| 2. | Bottom plate thickness 8mm |
| 3. | Side plate thickness 8mm |
| 4. | Front plate thickness 14mm |
| 5. | Back thickness 12mm |
| 1 | Make: |
Cumins engine |
| 2 | Continuous power: |
895kw(1217HP) |
| 3 | Speed: |
1800r/min |
| 4 | Fuel consumption: |
200g/kw.h |
| 5 | Lub. Oil Consumption: |
1.0g/kw.h |
| 6 | Average fuel consumption: |
160L/H |
| 7 | Cooling system: |
Water cooling |
| 1 | Auxiliary engine power: |
298kw |
| 2 | RPM: |
1800r/min |
| 3 | No.of cylinders: |
6 |
| 4 | Fuel consumption: |
200g/kw.h |
| 5 | Full power fuel consumption: |
53L/H |
| 6 | Cooling system: |
Water cooling |
| 1 | Make: |
JICHAI, Jinan, China |
| 2 | Model: |
YOTFJBX650-35Fsh |
| 3 | Input speed: |
1650r/min |
| 4 | Transmission efficiency: |
>or= 97% |
| 5 | Working oil temperature: |
<or=110ºC |
1 |
Make: | Hangzhou, China |
| 2 | Model: |
3P500 |
| 3 | Ratio: |
1.1:1 |
| 4 | Cooling ways: |
Water cooling |
| 1 | Make: | Shijiazhuang Industrial Pump, China |
| 2 | Model: |
Wn450 |
| 3 | Dredge pump water flow(cubic metre per hour): |
3000cbm/hr |
| 4 | Sand or solid capacity: |
3000cbm/hr |
| 5 | Diameter of suction: |
600mm |
| 6 | Diameter of discharge: |
450mm |
| 7 | Head: |
67m |
| 8 | Pump shaft power: |
770kw |
| 1 | Ladder lifting winch: |
1 set |
| 2 | Swing winch: |
2 sets |
| 3 | Diameter of drum: |
475mm |
| 4 | Working pressure: |
16Mpa |
| 5 | Wire rope speed: |
0-30m/min |
| 1 | Make: |
Yongli, China |
| 2 | Diameter: |
1800mm |
| 3 | Cutter shaft power: |
170kw |
| 4 | Cutter teeth quantity: |
40 |
| 5 | Cutter blade quantity: |
5 |
Our Services & Support:
Complimentary dredger consultations and product drawings
Customized dredger solutions based on your specific project needs
On-site and factory visit services available
Free assembly, training, and operational support to ensure smooth performance
1-year warranty with lifelong technical assistance
After-sales service agreements tailored to each client
Genuine spare parts offered at discounted prices
Dedicated sales, design, and manufacturing teams providing round-the-clock customer support
Customized Services
We provide tailor-made solutions designed specifically to meet your unique needs and requirements. Our customization ensures that every product meets your exact standards for quality, performance, and reliability.
Pre-Sales Consultation
Our team offers expert pre-sales consultation to help you select the most suitable solution. We'll address all your questions and technical concerns, guiding you toward the best choice for your project.
Delivery & Support
From transportation to installation, we provide comprehensive delivery support to ensure your equipment arrives on time and performs as promised. We stand behind every delivery with quality assurance and full-service follow-through.
FAQ:
Q: Can you customize products based on customer requirements?
A: Yes, we can customize products based on customer requirements and terrain conditions.
Q: What is your after-sales service policy?
A: We provide installation guidance, operation training, maintenance support, and troubleshooting services.
Q: How long is the warrenty of your equipments? Does your company supply the spare parts?
A: The warranty period of our factory is one year. And of course we will supply the spare parts for you for life-long time at lowest cost.
Q: How is your packaging and transportation ?
A: All cutter suction dredger transport by bulk we use the specially protection material to packaging. The fist layer use the film to pack the main pontoon the other equipment pack into the pontoon each the equipment is separated by the vacuum bag to protect the undamaged.
Q: How is your payment system?
A: Our factory support T/T L/C etc.
Q: How is your service?
A: Before sign contract we can send the engineer to the working site the research . then according to the requirements to make the design . professional engineer track throughout Cutter suction dredger is finished our factory will send the installation team to the abroad To help installation and training local worker .until cutter suction dredger can normal working.
Welcome to visit our factory in your free time!
){kind=link}