| Customization: | Available |
|---|---|
| After-sales Service: | Lifelong Service |
| Warranty: | Two Years |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| OEH environmental protection series single shaft shredder is a heavy load cutter crusher. This series of products are equipped with a single motor reducer to complete the overall crushing of materials through the interaction between the main shaft crushing moving knife and the static knife on both sides. The equipment is compact, but its core is very powerful. Alloy knife material. A variety of protection, reinforced bearing seat. Our equipment has reasonable price, mass production and exquisite workmanship. Each process is like heat treatment. There are strict requirements for hardness testing and structural flaw detection. |
| model | HEHJ-P1200 |
| power | 30kw |
| overall dimension | 3100*1000*1900(mm) |
| weight | 30t |
| suitable material | frozen meat board. aggregate .medium and large poultry |
| theoretical capacity | 6-10t/h Different materials have different capacity |
| discharge size | 5-8(cm) |
| reamer outer diameter | 500mm |
| spindle speed | 49turn/min |
| welding technology | Integral welding |
| frame material | 150*100*5 pitch tube |
| Harmless treatment center | Animal fat factory |
| Livestock farm | Organic fertilizer liquid fertilizer plant |
| Slaughterhouse | Food oil factory |
| Kitchen Waste Disposal Yard | It can crush more than 100 kinds of materials |
| 5.1 preparation: before starting the machine, first check whether there are materials, sundries and jamming in the crushing chamber; before starting the machine every day, check whether all fasteners are completely fastened, and deal with them immediately if they are loose; check the lubrication of each rotating part before starting the machine |
| 5.2 start up: the machine and transmission parts can be started up only after the inspection proves that they are in normal condition; the machine must only be started under no load, otherwise it is easy to damage the motor, reducer, coupling, etc; start (jog the test run first) if there is any abnormal condition or abnormal sound, stop the start immediately, find out the cause and eliminate the fault before starting again |
| 5.3machine operation: When the machine is running, the maintenance personnel should often go to the side of the machine to observe the operation: whether the machine has abnormal sound. If it occurs, first determine the position, and then stop the machine for inspection and treatment; whether the temperature rise of the motor is too high. Under normal conditions, the maximum temperature shall not exceed 80 ºC; check whether the bolts at the rotating part are loose. If they are loose, stop the machine immediately. |
| 5.4shut dowu: Before the machine stops working normally, the feeding shall be stopped first, and the crusher can be stopped only after all materials in the standby are broken. In case of machine failure or dangerous situation, the power supply can be cut off immediately. |
7.Photo:
){kind=link}