| Customization: | Available |
|---|---|
| After-sales Service: | Life Long Service |
| Warranty: | Two Years |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
2. Technical parameters of incinerator:
| 1. | Calorific value of incinerator: the mixed calorific value is less than 4500kcal / kg | |||||||||
| 2. | Equipment handling capacity: 500kg / h | |||||||||
| 3. | Ignition mode: automatic ignition | |||||||||
| 4. | Auxiliary fuel: diesel (low calorific value 10495kcal / kg) | |||||||||
| 5. | Incinerator structure: direct combustion furnace | |||||||||
| 6. | Temperature of primary combustion chamber: ≥ 800 ºC | |||||||||
| 7. | Temperature of secondary combustion chamber: ≥ 1100 ºC | |||||||||
| 8. | Flue gas outlet temperature of primary combustion chamber ≥ 850 ºC | |||||||||
| 9. | Incinerator body surface temperature ≤ 35 ºC | |||||||||
| 10. | Oxygen content of outlet flue gas (dry flue gas): 6% - 10% | |||||||||
| 11. | Pressure in the furnace: negative pressure design, no counter fire, and - 3 ~ - 10mmh2o column | |||||||||
| 12. | Burning rate of incineration residue gt; 5% | |||||||||
| 13. | The furnace body is well sealed, and the feed furnace door adopts sealing structure to avoid gas leakage. | |||||||||
4.Specification parameter table:
| Serial number | Specification and model | Main equipment size | Processing capacity(kg/batch) | incinerator volume (m2) | Power consumption(kw/h) | Oil wear (l/h) | Equipment weighing (t) |
| 1 | HRXS-25 | 1000*900*1700 | 25 | 2.5 | 2 | 3 | 1.15 |
| 2 | HRXS-20-40 | 1200*1300*1800 | 20-40 | 3.0 | 2-4 | 3-8 | 2.2-5.5 |
| 3 | HRXS-20-60 | 1700*1500*2100 | 20-60 | 5.0 | 2-5 | 3-10 | 4.5-7.8 |
| 4 | HRXS-50-120 | 2200*2000*2500 | 50-120 | 10.0 | 3-12 | 4-15 | 5.0-11.5 |
| 5 | HRXS-100-300 | 3000*3500*2900 | 100-300 | 13.0 | 10-30 | 10-40 | 15-25 |
| 6 | HRXS-400-500 | 3000*3700*3200 | 400-500 | 17.0 | 40-50 | 50-60 | 30-45 |
Tail gas reference standard:
| Number | Contaminants | Maximum allowable emission concentration limit under different incinerator capacity(mg/m3) | ||
| ≤300(Kg/h) | 300~2500(Kg/h) | ≥2500(Kg/h) | ||
| 1 | Smoke blackness | Ringerman level1 | ||
| 2 | Smoke | 100 | 80 | 65 |
| 3 | Carbon monoxide | 100 | 80 | 80 |
| 4 | Sulfur dioxide | 400 | 300 | 200 |
| 5 | Hydrogen fluoride | 9.0 | 7.0 | 5.0 |
| 6 | Hydrogen chloride | 100 | 70 | 60 |
| 7 | Nitrogen oxide | 0.1 | ||
| 8 | Mercury and its compounds | 500 | ||
| 9 | Cadmium and its compounds | 0.1 | ||
| 10 | Arsenic nickel and their compounds | 1.0 | ||
| 11 | Lead and its compounds | 1.0 | ||
| 12 | Chromium,tin,antimony,copper,manganese,and their compounds | 4.0 | ||
| 13 | Dioxins | 0.5TEQ ng/m3 | ||
6.Our factory:
5. Characteristic:
| 1. Automatic feeding and discharging system is set to avoid possible pollution caused by manual operation; | |||||||||
| 2. Secondary combustion design, the temperature in the furnace is above 1100 ºC ~ 1300 ºC, the flue gas is reprocessed, colorless, the combustibles are completely ashed, and the volume reduction ratio is ≥ 97%; | |||||||||
| 3. Small furnace volume and small equipment floor area | |||||||||
| 4. Design safety chain pin, two-level temperature control automatic alarm system, low operation cost and high degree of automation. | |||||||||
| 5. The full-automatic control technology is adopted to monitor and control the important parameters of the incineration process, with a high degree of automation. |
6.Our factory:
| Pre-sale | |
| 1. | Selection of equipment model |
| 2. | Design and manufacture products according to the special requirements of customers. |
| 3. | The manufacturer shall send engineers and technicians to inspect the site free of charge. |
| Sale | |
| 1. | Product acceptance. |
| 2. | Assist the customer to formulate the construction scheme. |
| After-sales | |
| 1. | Free guidance on equipment installation and commissioning. |
| 2. | Train technical personnel for customers. |
| 3. | On site training for operators. |
8. Our qualifications :
9.Customer visits :10.FAQ :
Q1:What about the delivery?
We can offer our equipment by containers or bulk ship, just depend on your actual request.
Q2:What is the warranty?
We provide 1 year warranty and free repair if quality problems emerge within warranty peride.
Q3:What's the payment methode?
We can accept T/T, L/C, WESTERN UNION and so on.
Q4:Is it factory?
Yes,we have our own factory.and welcome to visit our factory.thanks
Q5.Whether it can be customized according to customer requirements?
Yes,we can design according to customer's requirement,we have many kinds of model.you can choose the suitable one.
){kind=link}