10 inch cutter suction dredger gold mining equipment equipped with hydraulic system
1. 10 inch cutter suction dredger intorduce :
1.10 inch Cutter Suction Gold Dredger is flexible to most kinds of geologic structures and can be widely used in mineral digging, port(channel) dredging . reclamation works inland waterway dredging so on .
2.The capacity of 10 inch cutter suction dredgers range from 100cbm/h to 3000cbm/h, the dredging depth from 1m to 35m and discharging distance from 500m to 5000m which can satisfy different work demands.
3.The hull consists of three pontoons, one main pontoon (engine room), two side pontoons. All parts are dimensioned to allow to be transported by road, rail or water. The dredger is equipped with a rapid connection-disconnection system for the pontoons, achieved using bolts at deck level, hull front and rear, and hooks at the bottom. Further salient features of the dredger are the dredger is powered by a Marine engine. The main engine is to drive the dredge pump and hydraulic pump. Hydraulic pump will in turn power other all equipments such as cutter, swing and ladder winches, and the spud rams etc.
4.The hull is of all welded, steel construction to give the dredger the necessary strength required for dredging operations. The side pontoons are connected to the main pontoon by means of bolts.
5.The hull steel plate used is CCSB (shipbuilding steel plate ).
2. Main function :
| 1 |
Dredging pipeline operation. |
| 2 |
Transporting fuel oil and fresh water for the dredging site. |
| 3 |
Repairing cutter suction dredger. bucket wheel. dredging pipes and other parts. |
| 4 |
Anchor operation. transport anchor for position |
| 5 |
Transporting the workers and other materials. |
| 6 |
Pushing and tugging dredgers and other dredging equipment. |
3. 10 inch cutter suction dredger basic parameter :
| 1 |
dredging depth |
8m |
| 2 |
discharge distance |
1000m |
| 3 |
water flow |
1500m |
| 4 |
solid capacity |
300m3/h |
| 5 |
main engine power/brand |
456kw/Cumins |
| 6 |
auxiliary engine power/brand |
122kw/Cumins |
| 7 |
cutter head power |
64kw |
| 8 |
PLC brand |
Siemens |
| 9 |
sand pump brand |
Shijiazhuang industrial sand pump factory |
| 10 |
hydraulic brand |
Rexroth |
4. Features:
| 1 |
High efficience. large output and long distance of engine- main engine brand is Weichai.Cumins. |
| 2 |
Very simple and fast assembly and dis-assembly afloat or onshore simple operation ,easy to control. |
| 3 |
Highly efficient fuel consumption and minimum overall operational costs |
| 4 |
Operation by one man from spacious and low noise operating cabin.Controls and instrucments mounted in ergonomic dash board. |
| 5 |
By absorbing advanced technology of Dutch and American related products, this series of dredgers show their characteristics of rational design, all hydraulic control, simple operation, little maintenance and strong power. |
5.10 inch cutter suction dredger pictures :
6. Main parts introduce :
Sand pump :
1.WN dredger pump adopts semi double shell structure, which reduces unnecessary auxiliary structure and process structure.
2.Advanced hydraulic model with high efficiency. The efficiency of the WN mud pump is 2-3 percentage point higher than before. In this way, lower energy consumption can be achieved at the same output.
3.Good wear resistance with long life.
Also can install Imported Original Pump from Abroad.
Diesel engine brand :
Cumins Engine is global warranty,spare parts can be available in short time.
Environmental protection and Energy conservation
The main engine driven the dredge pump and auxiliary engine drives hydraulic system including cutter,swing winches,ladder winch and the spud rams etc. And the emergency genset supplies electricity for lighting and emergency use when the dredge doesn't work.
Hydraulic cutter head system :
An integral hydraulic system includes hydraulic cutter head, hydraulic winch, hydraulic pump, hydraulic valve manifold, solenoid valve, hydraulic pipes, hydraulic components, electrical actuator and so on.
The hydraulic system requirements are very high and strict, it is the main artery of the entire dredger. The swing winches,lifting winch and cutter head are all driven by separate hydraulic motors.
The spud cylinder is hydraulic powered to lift spuds, the alternate swing of spuds will move the dredger.
7. Cutter suction dredger package :
| 1 |
Assist the customer in project planning and requirements analysis |
| 2 |
Providing consulting and design service according to the customers reqirement to make our product achineve to the greatest extent to meet needs of customers |
| 3 |
Training how to instal the machine, training how to use the machine |
| 4 |
Engineers available to service machinery overseas. |
8. Our certification :
9. Our customers :
10. FAQ
1. Are your products certified?
Yes, we are ISO9001:2008, SGS, and BV certified.
2. Can you customize products based on customer requirements?
Yes, we can customize products based on customer requirements and terrain conditions.
3. What is your after-sales service policy?
We provide installation guidance, operation training, maintenance support, and troubleshooting services.
4. How can I visit your factory?
Please contact us in advance to schedule your visit, and we will assist with the arrangements.
5. Do you have your own factory?
Yes, we are a manufacturer with our own factory, and we welcome visits to our facility.
6. How can I get more information?
Please contact us through our website, email, or phone.
Audited Supplier 
){kind=link}