Corrosion resistance and temperature insulation incinerator for dead animal /domestic waste/industrial garbage
1.product introduction:
Incinerator is an environmental protection equipment that incinerates waste gas, waste liquid, solid waste fuel, medical waste, domestic waste, animal carcass, etc. at high temperature, so as to reduce or reduce the quantitative number, and make use of the heat energy of some incineration media.
2.Benefits of using incinertors:
1. |
Incineration range: incinerators can burn any combustible waste that cannot be used |
2. |
Remove bacteria and pathogenic bacteria, high temperature harmless treatment |
3. |
Energy recovery: Energy from waste can be converted into steam, electricity or hot water |
4. |
Using a variety of design structures, so that with bacteria, harmful gas treatment more thoroughly, and greatly save energy |
5. |
Two - or multi-stage incineration, incineration temperature, high temperature treatment, sterilization, and decomposition into harmless gas emissions |
6. |
According to the characteristics of the waste design, the combustion effect is good, the furnace body adopts the third generation of furnace body combustion chamber, its combustion adaptability is particularly wide, the mixing degree is particularly ideal, fuel saving, secondary pollution, and more durable than the general furnace, long service life. |
3.Incinerator operation steps:
The operation steps of harmless treatment with incinerator: inject fuel, turn on the power supply, start the combustion supporting switch, the temperature in the furnace reaches the spontaneous combustion temperature, put the diseased livestock and poultry carcasses and their products into the furnace, turn off the combustion supporting switch, start the spontaneous combustion switch, keep the diseased flesh in the spontaneous combustion state, and put the diseased livestock and poultry carcasses that cannot be cut into the incinerator as a whole, and start the spontaneous combustion switch, The body ignited until it was completely carbonized
4.Technical par ameter:
erial number
|
Specification and model |
Main equipment size |
Processing capacity
(kg/batch) |
incinerator volume
(m2) |
Power consumption
(kw/h) |
oil wear
(l/h) |
Equipmentweight
(t) |
|
1 |
AEHA-25 |
1000*900*1700 |
25 |
2.5 |
2 |
3 |
1.15 |
|
2 |
AEHA-20-40 |
1200*1300*1800 |
20-40 |
3.0 |
2-4 |
3-8 |
2.2-5.5 |
|
3 |
AEHA-20-60 |
1700*1500*2100 |
20-60 |
5.0 |
2-5 |
3-10 |
4.5-7.8 |
|
4 |
AEHA-50-120 |
2200*2000*2500 |
50-120 |
10.0 |
3-12 |
4-15 |
5.0-11.5 |
|
5 |
AEHA-100-300 |
3000*3500*2900 |
100-300 |
13.0 |
10-30 |
10-40 |
15-25 |
|
6 |
AEHA-400-500 |
3000*3700*3200 |
400-500 |
17.0 |
40-50 |
50-60 |
30-45 |
5.transport:
6.Why us?
A. Factory direct manufacturing. Professional direct selling manufacturer of waste incinerator.
B. Can be trusted. Incinerators have been provided to the United Nations
C. Big companies. We have CE, ISO and OHSAS certificates.
D. Ensure quality. We tested the operation of each incinerator before shipment.
E. Excellent service. We will always provide you with 24-hour / day online service.
F. Fast delivery. In general, we can complete the manufacturing within 15 days.
7.customer visit:
8.Our service commitment
Pre sales:
1. Selection of equipment model.
2. Design and manufacture products according to the special requirements of customers.
3. The manufacturer shall send engineers and technicians to inspect the site free of charge.
In sale:
1. Product acceptance.
2. Assist the customer to formulate the construction scheme.
After sales:
1. Guide equipment installation and commissioning for free.
2. Train technicians for customers.
3. Train operators on site.
Pre sales:
1. Selection of equipment model.
2. Design and manufacture products according to the special requirements of customers.
3. The manufacturer shall send engineers and technicians to inspect the site free of charge.
In sale:
1. Product acceptance.
2. Assist the customer to formulate the construction scheme.
After sales:
1. Guide equipment installation and commissioning for free.
2. Train technicians for customers.
3. Train operators on site.